Download Cable Catalogue
Download Shifter Catalogue

Tel: +44 (0) 1623 440398

 

You are here: Home > Product Info > Modulators


Modulators



Modulator cable ControlThe modulator cable control is designed to send the
engine throttle rate (on a mechanically governed
engine) to the hydraulic control valve in the transmission.
It will fit Allison Transmission models AT500,
MT600, HT700, V730, CLT650, and CLBT750 series.
 

SPECIFICATIONS:

 

Control Cable is polymer lined rated at 300° F (149° C)
4 inch bend radii minimum
Built-in spring returns to idle
Pull function recommended, but push also available

 

MODULATOR SLIP LINK KIT (shown right)

The Slip-Link kit includes the necessary hardware for complete installation of the Modulator to the engine fuel control lever. Kit includes a slotted slip-link, link pin, flatwasher, cotter pin and locknut. To order, see chart below.

Polymer Link
Part No.
Thread Size
For Use With
Modulator Part No.
59049-1
(3 Series)
10-32 UNF-2A THD
2124, 2179, 2180
59049-2
(4 Series)
1/4-28 UNF-2A THD
2220, 2225, 2230, 2235
Modulator Slip Link Kit


 

Modulator Slip Link Kit

 

Pull Type Description Transmission
2124 Clamp 3-Series end FMX (threaded mount)
2179 Clamp 3-Series end C-6
2180 Bulkhead 3-Series end C-6
2182 Bulkhead 4-Series end Hydramatic (350/400)
2183 Clamp 4-Series end Hydramatic (350/400)
2220 Bulkhead 4-Series end Allison
2230 Clamp 4 Series end Allison
     
Push Type Description Transmission
2225 Bulkhead 4-Series end Allison
2235 Clamp 4-Series end Allison

 

Call us on 01623 440398