Tel: +44 (0) 1623 440398

 

You are here: Home > Product Info > Shifters


Shifters

click here for compatible transmission models

NG SHIFTER

 

This product combines the strength and reliability of the T-Handle Shifter with the latest in manufacturing technologies to produce a high value control system for our customers.

 

As an added feature, we have incorporated a quick-connect cable mounting system into this control. Utilizing a clamp built into the cable mounting bracket, the assembler needs only a standard 1/4 x 1" bolt and locknut to attach the cable to the control.  This allows faster assembly of the cable, while using common mounting hardware available anywhere.

 

 

Standard features:

 

Steel chassis and handle assembly

Black E-coat finish on handle and zinc plating on other metal parts for corrosion protection

Black textured polymer knob and trim covers

Four 1/4-20 threaded mounting holes

All detents are positive locking (no ramping between detents)

Requires 4 series, 3" travel cable with clamp type hub and 1/4-28 rod threads

Maximum 2 1/2" of actual cable travel produced

Built-in cable clamp requires a 1/4 x 1" bolt w/locknuts

Unthreaded pivot for easy cable hook-up

 

Available configurations:

 

Right or left hand mounting

Push or pull to reverse

Top mounting plate available

14 or 28 VDC illumination, single or dual (ground included) wire leads

Electrical Switches - contact factory

Side push button factory preset at 0 or 45 degrees

Cable bracket angle factory preset at 0, 30, 60, or 90 degrees

Currently available for Allison AT545, MT643, MT653DR, MT654CR, HT740, HT750CR, HT750DR, HT754CR

click here for compatible transmission models

 

  

PUSH BUTTON (THUMB) SHIFTER

 

click here for compatible transmission models

  

STANDARD SHIFTER (T-HANDLE)

 

click here for compatible transmission models

  

AIR INTER LOCK SHIFTER

 

 

  
click here for compatible transmission models
  

TRANSMISSION CONNECTION KITS

 

Transmission kits come complete with shift arm, transmission mounting bracket, cable hanger and required hardware. Connection kits designed to fit any of the five most popular entry positions to the transmission shift arm. Refer to the following drawings to find the cable entry that best fits your vehicle requirements and shifter control positions (push to reverse, pull to reverse), then assemble the kit to match the installation required.

 


 

  
 
 
 
   

click here for compatible transmission models

ACCESSORIES

 

MOUNTING FLANGE

59002

Made of prefabricated steel with a matte black epoxy finish. Simplifies a top mount installation and is perfect for vehicle conversions. Kit is complete with control mounting hardware.  Use with cable hanger bracket in any position.

  

 

TRANSMISSION CONNECTION KITS

Unassembled Universal Kit
Oil Pan Mount
 

59004
59006
59005		  4 Series
 6 Series
 4 and 6 Series Hardware

Kits to be assembled in field to fit
installation required

Machine Pad Mount
 

59369-1
59369-2		 4 Series
6 Series

Mount to machine pad above the transmission shift arm. They do not mount to oil pan bolts as shown in diagrams above.

MOUNTING WEDGE

59009

A cast aluminium wedge with a matte black epoxy finish. Raises the shifter to a 17 degree angle from desired mounting surface. Kit is complete with control mounting hardware.  Use with cable hanger bracket in any position except #1 or #2.

 

  

 

MOUNTING TOWER

59000 (13")
59035 (9")

A prefabricated tower with matte black epoxy finish. Features access panels on both sides for easy installation and adjustment. A rubber floor gasket is included with tower. Kit is complete with control mounting hardware. For use with cable hanger positions #3, 4, 7 and 8 only!

 

  

 

SWITCH AND PIN SET KIT

50036-1

SWITCH SET

50036-2

PIN SET

50036-3

FINGER RELEASE KIT

59193-1

T-HANDLE KIT

59228

PUSH-PULL SHIFT CABLES

(Used with Controls and Kits)
4 Series: 1/4 - 28 thread, base part number: 100-4333 length
(recommended)
6 Series: 5/16 - 24 thread, base part number: 100-6333 length

NO DESCRIPTION
75001 ALLISON AT540-543, 545 MT 643-644
75002 ALLISON MT653R, CLT650, MT650
75003 ALLISON MT654CR, HT750-CRD
75004 ALLISON V370
75005 ALLISON HT750DRD, CL(B)T750, CLT654
75006 ALLISON HT740, HT740S, HT740D, TRT221-1, 221-3
75007 ALLISON TRT 2421-1, 2421-3, TRT4820-1, 4280-3
75008 ALLISON AT470, AT475
75009 ALLISON CRT 5633 (FNR)
75010 ALLISON CRT 5633 N-1-2-3
75011 ALLISON AT540 (RND)
75012 ALLISON MT30, MT31, MT40, MT41, HT70
75013 ALLISON AT540, AT543, MT643, MT640 (SPECIAL GATE)
75014 ALLISON AT540, AT543, MT643, MT640 (SPECIAL GATE)
75015 ALLISON 4460-N-1-6 ONLY (WINCH TRANSMISSION)
75016 ALLISON 4460 R N-1-6
75017 BORG WARNER PR1-2 SPEED .31 TRAVEL DIRECT TO VALVE (HANDLE PIVOT AT 1.125 R)
75018 ALLISON HT750 DRD CL (B) T750 CLT654 (DETENT N-D5, 2)
75019 ALLISON AT540, 543, MT643, 644 (DETENT ALL SPEEDS UP GATE FFG0)
75020 ALLISON CLBT750 (DETENT R TO N)
75021 CHRYSLER 727
75022 ALLISON HT740, HT740S, HT740D RND ONLY (RND ONLY)
75023 ALLISON HT750, DRD, CLBT750 CLT654 (RATCHET GATE)
75024 FORD C3 FNR ONLY
75025 GM HYD400 (SPECIAL GATE)
75026 BORG WARNER 40, 6 POSITION (SPECIAL GATE, MC)
75027 BORG WARNER 40, 5 POSITION
75028 ZF 4HP22
75029 ZF 3HP22
75030 SPAN ENG. TRANSFER BOX 4x4 4x2 (TRIM) (DRILL HANDLE 1.25, SEE SPEC. SHEET)
75031 FNR (ELEC). (SEE SPEC. SHEET)
75032 SPEED AND BRAKES (SEE SPEC. SHEET)
75033 NEW PROCESS TRANSFER BOX 205 (1.25 HANDLE R)
75034 AT540 (DN GATE ONLY) (1.25 HANDLE R)
75035 (FNR ONLY)
75036 ALLISON HT750 CRD (SPECIAL) (SP GATE)
75037 ALLISON MT653DR, CLT650, MT650
75038 ALLISON CLUTCH CONTROL LOCK TO REAR
75039 CHRYSLER 727AUTO (SP GATE TO GS)
75040 CHRYSLER HYDROSTATIC (SPECIAL) (C/W 50040)
75041 ALLISON AT540 SPECIAL INTERLOCK CONTROL
75042 ZF 4HP 22 R.R. P=45* FORWARD
75043 ALLISON AT540 SPECIAL GATE NARROW N-GATE 140"
75044 BORG WARNER SPECIAL CONTROL BW40-5 POS. (FLOOR MOUNT SEE SPEC.)
75045 BORG WARNER SPECIAL CONTROL BW40-5 6 POS. (FLOOR MOUNT SEE SPEC.)
75046 CLARK 18,000 TRANS. SINGLE SPOOL FNR 1, 2, 3, 1.75" LINEAR CABLE 48* MOVEMENT
75047 CLARK 18,000 TRANS. TWIN SPOOL FNR 1, 2, 3, 1.75" LINEAR CABLE 48* MOVEMENT
75048 SPECIAL FIRE SERVICE - INTERLOCK ELECT. & MANUAL CONTROL MOUNTED IN SHORT TOWER.
75049 SPECIAL DEAD MAN'S HANDLE CONTROL FITTED WITH SWITCH ON TOP OF KNOB OF PUSH BUTTON CONTROL. NO GATE PLATE
75050 ALLISON HT740
75051 BORG WARNER 55 6POSITION 3 SPEED
75052 VW AUTO 089 TRANSMISSION USING STANDARD LEVER ON TRANSMISSION 39MM LONG
75053 SPECIAL THROTTLE - CONTROL UNBRAKED 3 SERIES CABLE FAST-SLOW FAST TO REAR TRIM PLATE
75054 SPECIAL HYDROSTATIC CONTROL 4 SERIES CABLE, REVERSE FORWARD, REVERSE TO REAR TRIM PLATE
75055 AT540 - 643
75056 MT653 R/CLT650/MT650
75057 HT654 CR/HT750 CRD
75058 HT750 DRD/CLBT750/CLT654
75059 HT750 DRD/CLBT750/CLT654
75060 DODGE 50
75061 ZF 4HP 22 AAR4465
75062 MT653 INHIBITOR
75063 FORD A4LD
75064 V/W AG4 95
75065 ZF 4HP 22 - 70* GATE
75067 HT740
75068 C6 FORD
75070 MT653
75071 SAME AS 75003 BUT TOP MOUNT
75072 AS 75102 BUT TOP MOUNT
75073 F-N-R SWITCHED
75074 H-N-L SWITCHED
75075 AT540
75076 ALLISON 1000/2000 123DNR
75077 ALLISON 1000/2000 12345NR
75078 BORG WARNER MOD40
75079 ALLISON 1000
75080 SPECIAL AT545
75081 MT653
75082 SPECIAL AT545 N/LOCK - DENNIS SPECIALIST VEHICLES
75083 ALLISON 1000 123DNRP
75084 ALLISON MT653 WITH TOP MOUNT CHASSIS AND BEZEL.
75085 ZF FREIGHT ROVER SPEC.
75086 ALLISON 1000 134DNRP
75089 RDB
75090 VICKERS EMERGENCY
75091 ADTEC, DUAL CABLE
75092 AVIALIFT SPRING CONTROL
75097 LTI R/H + L/H
75098 LTI NEW NISSAN GEARBOX (STD STYLE)
75099 750 TRANSMISSION
75100 ALLISON AT540-643. AIR INTERLOCK CONTROL. SEE SPEC. SHEET NARROW GATE RATCHET
75101 ALLISON AT540 C/W 50040 TOP PLATE (DETENT D-N)
75102 AIR INTERLOCK (STAM/PLANT)
75103 AT540 - 644
75104 MT653 R/CLT650/MT651
75105 HT654 CR/HT750 CRD
75106 HT750 DRD/CLBT750/CLT654
75107 HT750 DRD/CLBT750/CLT654
75108 FORD C3
75109 SPECIAL POSITION VERSION OF 75700
75110 AT540 - 643-SPEED SENSITIVE
75111 AS 75100 BUT TOP MOUNT CHASSIS AND TRIM
75112 AS 75100 BUT LARGER CYLINDER
75113 AIR I/LOCK CHRYSLER 727
75115 AS 75080 BUT INTERLOCK (USA TYPE) AT NEUTRAL AND TOP MOUNT
75120 CHRYSLER 727
75130 FORD A4LD (47 RAD LEVER)
75132 FORD ATX (PRECISION POINT)
75140 BORG WARNER BTR ATP
75150 ALLISON TALBOT DIESELS USE RANGE ROVER SIDE PLATE AT540 NO SWITCHES 12 VOLT
75151 SPECIAL MERCEDES-BENZ AUTO W4B-035
75165 CHRYSLER 727
75168 C6 FORD WITH 59 OTO HANDLE RELIANCE
75170 BETA - PROJECT
75180 AT540/543/545 MT643-644
75190 LAND ROVER ZF 4HP 22
75200 DUNCAN VEHICLES (ELECT).
75201 SPECIAL (SEE SPEC. SHEET) (NO COXCOMB) (DUAL STATION THROTTLE SPECIAL)
75202 SPECIAL (SEE SPEC. SHEET) (NO COXCOMB) (DUAL STATION THROTTLE SPECIAL)
75203 SPECIAL ELECTRIC CONTROL
75204 6 POSITION CONTROL
75205 PERMAQUIP (DEAD, M, M)
75207 BORG WARNER T72
75208 BORG WARNER T72
75209 BORG WARNER T72
75211 AS 75011 BUT TOP MOUNT
75220 RO-TER-TECH (SPECIAL)
75228 SPECIAL ZF 4P22
75229 SPECIAL AT540
75230 SPECIAL ZF HP22 ZF 4H22 R.R. SPEC. P=45*
75231 SPECIAL MERC. 310 (LINEAR TRAVEL 2.67")
75232 SPECIAL HT740, HT740FS, T740D
75233 PUSH METRO (METRO, CAM)
75234 PUSH BUTTON
75235 BW55 (6 POSITION TRANS)
75236 AUSTIN HT750/CLB750/CLT654
75250 SPECIAL HYDROSTATIC BRAKE
75251 SPECIAL THROTTLE CONTROL
75252 SPECIAL THROTTLE CONTROL BRAKED
75253 SPECIAL HYDROSTATIC (PTO) 2 SWS. POSS.
75254 UNBRAKED VERSION OF 252
75260 DODGE CONTROL
75300 ALVIS SPECIAL CONTROL
75310 CHRYSLER 727 C/W 50940-1 HANDLE
75320 E94/0167/I13 ITALIAN IVECO SHIFTER WITH CUT OUT 50012
75352 BORG WARNER PR9 (3)
75353 BORG WARNER PR2 (4)
75360 75100 VERSION PF 75021
75361 AS 75360 BUT NO SOLENOID
75365 CABLE TEC THROTTLE CONTROL
75366 MORRISON HYDROSTATIC
75367 MORRISON HYDRO. THROTTLE
75370 FMC HYDROSTATIC CONTROL
75380 ALLISON HT750
75400 CHRYSLER 727
75401 CHRYSLER 904
75402 BORG WARNER 65, 5 POSITION
75403 BORG WARNER 65, 6 POSITION
75404 CHRYSLER 727 D3 SPECIAL GATE
75405 BORG WARNER FRONT MOUNT
75406 BORG WARNER OLD STYLE
75407 BORG WARNER 65 SPECIAL CONTROL (DETENT) NO DETENT
75408 BORG WARNER 65 - 55
75409 AT545
75413 CHRYSLER 727
75415 HYDROSTATIC
75420 BORG WARNER (NO LOW)
75421 BORG WARNER (NO LOW) C/W 50297
75463 VO/TH MIDIMAT T3
75503 CHRYSLER 727 (RND)
75513 THROTTLE CONTROL (AS 370 BUT)
75514 THROTTLE CONTROL (FRICTION BRAKE)
75515 HYDROSTATIC CONTROL FNR CENTRE DETENT
75516 THROTTLE CONTROL NO BRAKE
75517 4x4, 4x2 TRANSFER BOX TRIM (DRILL HANDLE 1.25, SEE SPEC. SHEET)
75518 HYDROSTATIC CONTROL FNR CONTROL DETENT (BRAKE) (FNR)
75519 THROTTLE CONTROL WITH FRICTION BRAKE UK TYPE
75520 BORG WARNER SPECIAL
75522 HYDROSTAT. (SPEC. N GATE)
75523 THROTTLE CONTROL C/W TRIM PLATE (STOP/SLOW/FAST/REAR)
75524 THROTTLE CONTROL - US TYPE TRIM PLATE (SLOW/FAST/REAR)
75531 ZF4HP14 TRANSMISSION. USING 90mm LEVER RAD
75890 CHRYSLER 727 (RND)
75900 THROTTLE CONTROL (AS 370 BUT)
75901 THROTTLE CONTROL (FRICTION BRAKE)
75902 HYDROSTATIC CONTROL FNR CENTRE DETENT
75903 THROTTLE CONTROL NO BRAKE
75904 4x4, 4x2 TRANSFER BOX TRIM (DRILL HANDLE 1.25, SEE SPEC. SHEET)
75905 HYDROSTATIC CONTROL FNR CONTROL DETENT (BRAKE) (FNR)
75906 THROTTLE CONTROL WITH FRICTION BRAKE UK TYPE
75907 BORG WARNER SPECIAL
75909 HYDROSTAT. (SPEC. N GATE)
75910 THROTTLE CONTROL C/W TRIM PLATE (STOP/SLOW/FAST/REAR)
75911 THROTTLE CONTROL US TYPE TRIM PLATE (SLOW/FAST/REAR)
75918 ZF4HP14 TRANSMISSION. USING 90mm LEVER RAD
Call us on 01623 440398